https://www.protohaven.org/wiki/ 2026-04-24T14:18:30+00:00 https://www.protohaven.org/wiki/ https://www.protohaven.org/wiki/_media/logo.png text/html 2024-02-08T00:12:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.protohaven.org/wiki/tools/laser_rabbit/clearance?rev=1707351123&do=diff Rabbit Laser Clearance Members who are already proficient in the subject matter may apply to receive a clearance by demonstrating a core set of skills and knowledge that allow them to safely and effectively use the equipment. " Most tools in the shop require clearance before solo use. Each tool is different and most are expensive and/or delicate. text/html 2024-10-17T20:36:06+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.protohaven.org/wiki/tools/laser_rabbit/maintenance?rev=1729197366&do=diff Rabbit Laser Cleaning and Maintenance Keeping laser mirrors and lenses clean are a very important part of maintenance for our laser systems. The concepts from this guide are borrowed heavily from this page from omtech. There is also this Maintenance schedule from Rabbit Laser that we will get much of our guidance. text/html 2023-09-24T19:22:11+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.protohaven.org/wiki/tools/laser_rabbit/material_safety?rev=1695583331&do=diff Protohaven Approved Laser Material List Scan QR to see the current version of this document or to follow links. ⛔ Unapproved material use is prohibited for use in the lasers. Failure to comply will lead to revocation of privileges or membership. text/html 2024-12-28T18:03:38+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.protohaven.org/wiki/tools/laser_rabbit/start?rev=1735409018&do=diff Rabbit Large Format Laser * Model: Rabbit QX1290 * Manufacturer: Rabbit Laser * Manual: Download * Clearance Required: Rabbit Laser Proficiency Based Clearance * As of Dec 2024, Laser 1: 100W, laser 2: 80W A laser cutter is used to mark, engrave, or cut a wide variety of materials. They work a lot like printers do, where you send a graphic to print. Instead of ink, the laser uses heat to transfer the image onto the material. text/html 2024-04-26T22:31:23+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.protohaven.org/wiki/tools/laser_rabbit/techs?rev=1714170683&do=diff Rabbit Large Format Laser Tech Checklist Use Start Up * Import your file into Lightburn * Set the job origin in Lightburn * Check the layer mode * Adjust the speed and power settings * Power on the laser * Listen for the exhaust to ensure that it is on