Differences

This shows you the differences between two versions of the page.

--- tools:general_wood:miter_saw_clearance [2024/01/10 19:22] – [Safe Setup/Operation/Cleanup] golond
+++ tools:general_wood:miter_saw_clearance [2024/02/07 23:35] (current) – smartin015
@@ Line 1: / Line 1: @@
-====== Miter Saw Proficiency Based Clearance ======
+====== Miter Saw Clearance ======
 {{section>tools:clearance_template&noheader&nofooter}}
@@ Line 15: / Line 15: @@
   * Blade down locking pin
   * Depth stop adjust
-  * Blade roll adjust pin
+  * Miter angle detent lock/trigger
-  * Blade yaw adjust lock
+  * Miter angle cam lock/lever
+  * Bevel angle lock/lever
+  * Bevel angle 90 degree stop/dual-bevel mode
   * Hold down clamp
   * Keep out zone
@@ Line 31: / Line 33: @@
   * Acknowledges the keep-out zone of the saw must be observed
+  * Acknowledges some stock may be too small to cut on the miter saw