Differences

This shows you the differences between two versions of the page.

--- tools:jewelry_kiln:start [2024/04/18 19:46] – [4/18 "is there an alarm buzzer" test] me
+++ tools:jewelry_kiln:start [2024/04/25 18:57] (current) – me
@@ Line 2: / Line 2: @@
 This kiln is working, but has no active users, so we are in the process of learning its idiosyncrasies and making a proper doc.
+  * Model: unknown/custom electric kiln
+  * Controller: [[https://www.auberins.com/index.php?main_page=product_info&products_id=4|SYL-2352 Ramp and Soak PID Temperature Controller]]
+  * [[https://www.auberins.com/images/Manual/SYL-2352P%20Manual.pdf|Controller manual]]
+====== Tool anatomy ======
+{{:tools:jewelry_kiln:jewelry_kiln.jpg?nolink&600|}}
+. Controller
+. Breaker switches
+. Alarm lights
+. Temperature probe
+. Latches
+. Viewing port
+====== To do ======
+  * open & inspect electronics panel for safety
+  * order & install alarm buzzer-lights
+  * apply a better door seal
@@ Line 59: / Line 83: @@
 | 10 | 1000 | 60 |
 | 11 | 1100 | 60 |
-| 12 | 1200 | 60 | holding for an hour |
+| 12 | 1200 | 30 | holding for 1/2 hour for 1/2" of material |
-| 13 | 1200 | 60 | ramping down 100˚/hr |
+| 13 | 80 | -121 | stop |
-| 14 | 1100 | 60 |
-| 15 | 1000 | 60 |
+The official kast-o-lite packet says to ramp down 100˚ per hour, but people online seem to skip this step.
-| 16 | 900 | 60 |
-| 17 | 800 | 60 |
-| 18 | 700 | 60 |
-| 19 | 600 | 60 |
-| 20 | 500 | 60 |
-| 21 | 400 | 60 |
-| 22 | 300 | 60 |
-| 23 | 200 | 60 |
-| 24 | 100 | 5 |
-| 25 | 70 | -121 | stop |
 ==== misc notes ====